|
3090 MEDIUM PRESSURE RELIEF VALVE.
Thread is G 1/4. Construction is chrome plated brass.
This may be easily adjusted between 150 & 250 bar. CE Marked.
3091 HIGH PRESSURE PRESSURE RELIEF VALVE.
Thread is G 1/4. Construction is chrome plated brass.
Model shown is 3091. Model 3090 is very slightly smaller.
This may be easily adjusted between 250 & 350 bar. CE Marked.
Both models carry 'CE' approval. Not to be used with 100% Oxygen.
|
|
1242 Storage cylinder valve for Oxygen or Air.
Outlet is G 5/8
Female Bullnose to BS 341 No: 3. W.P. 200 Bar.
Cylinder thread is 1 inch BSP Taper
1243 Valve as above but outlet is G 5/8 300 Bar Din.
W.P. 300 Bar. Both valves are balanced to offer low
opening resistance. Brass chrome plated.
|
|
1072 BENCH MOUNTED TESTING ASSEMBLY
The G 1/4 female inlet is in the base.
Supplied with our 4005 Din convertible
valve. A 300 Bar valve may be substituted
at no extra cost. Complete with 0-400
Bar gauge. All chrome brass construction.
Can be supplied without the gauge.
|
|
1341 PIN INDEX VALVE
M25 x 2 mm. Valve for Oxygen Use.
|
|
7100 REDUCING REGULATOR 200 BAR DIN
Gives an outlet flow rate of 2 Litres per minute.
Used for analysing gases. All chrome
plated brass construction.
Regret not available for 300 Bar.
|
